top of page
Lybrae Spatial Solutions – Home

Reading a Site Constraints Map in Kenya: What to Verify

Nov 2
3 min read

A site constraints map helps organise the questions that could affect a development proposal: the site location, surrounding uses, access, infrastructure, environmental features and relevant planning information. Its value depends on the sources, their limitations and the follow-up work attached to the findings.


Use the map to decide what needs investigation before a proposal advances. Ask the team to explain which features are recorded facts, which are interpretations and which need confirmation through survey, fieldwork, specialist assessment or authority records.


Begin with the map's purpose and date


Establish the area covered, the intended decision and when the map was prepared. Check the legend, scale, coordinate reference system and sources of the main layers.


Ask for the observation date of imagery and field records as well as the publication date of documents. A recently prepared map may use older inputs. The explanation should identify whether those dates are suitable for the decision you are making.


For the wider commissioning question, see our GIS and spatial analytics service and planning baseline guide.


Establish what the site outline represents


A parcel outline may be based on an official survey record, another supplied dataset or an approximate location supplied for an initial discussion. The map should state its source and intended use.


Ask the responsible survey professional to address discrepancies affecting the legal boundary, area or relationship with adjoining interests. Keep the planning discussion connected to the appropriate title and survey records, especially where an access route or proposed building position depends on the boundary.


Our planning due diligence service can help organise the linked enquiries and identify which specialist records are required.


Separate planning designations from observed activities


An image or field record can show what appears to be happening on the ground. A planning document describes a different kind of information: policies, designations or development controls whose status and applicability must be established.


Check the edition, coverage, approval position and scale of each planning source. Establish whether a more detailed plan or applicable county control needs to be consulted. A general county diagram may help explain the wider setting while leaving important site questions unresolved.


Our planning document guide explains how to check edition, status and site relevance. The 2025 planning handbook reading note provides another route into the relevant planning material.


Examine access and services as separate enquiries


The presence of a road, power line or water connection on a map does not establish every fact needed for a development decision. Ask the team to distinguish physical observation, documented rights and confirmation of available capacity or connection arrangements.


Record the questions for the appropriate authority, utility or specialist. These might concern lawful access, the condition of the route, drainage connections or the servicing implications of the proposed scale of development.


The findings should state the evidence already reviewed and the confirmation still needed, together with the person responsible for obtaining it.


Treat environmental features according to their evidence


Mapped waterways, low-lying areas, vegetation or other features can identify matters needing closer investigation. The available data may have limitations in date, resolution, coverage or method. A screening map should explain those limits and the implications for further work.


USGS guidance on Landsat surface reflectance provides an example of the product-specific resolution and processing issues relevant to satellite interpretation. The choice of data should follow the question being investigated.


Where a feature raises a potential environmental or engineering constraint, agree the appropriate field and specialist checks. Keep any required environmental assessment or climate resilience analysis clearly defined in the scope.


Read the findings register alongside the map


A useful register connects each material issue to:


  • The feature or area concerned and the source of the information.

  • The finding and the assumptions behind its interpretation.

  • The consequence for the proposed decision, where it can reasonably be assessed.

  • The next check, responsible person and evidence needed to resolve it.


Ask the analyst to identify conflicts between sources and important gaps in coverage. Agree how a revised proposal, new survey record or additional fieldwork will update the map and its conclusions.


An illustrative decision


Suppose a purchaser is comparing two plots for a small development. A constraints map may reveal that one has unresolved access information while the other needs a closer drainage investigation. Those findings inform the next enquiries and the comparison of options.


The decision should then draw on the verified title, planning and technical information gathered for each plot. This is an illustrative scenario; it does not describe a completed Lybrae commission or establish that either site is suitable.


Bring the proposal into the discussion


Share the site location, intended development, available records and the decision you need to make. A development feasibility and appraisal brief can connect the mapped issues with the other investigations needed for the proposal. Discuss the scope with Lybrae.

bottom of page